TTillman & AssociatesSouth Texas HVAC Rep
← All posts
Sterile-Aire

Steril-Aire / UV Resources DEX (DE[X]) Double-Ended UV-C Fixture

Learn how DEX internal fixtures fit HVAC coil and airstream projects, what double-ended means, and how to identify replacement lamps and parts.

Start with your project requirements

Use our product selection tools to prepare the equipment details for review.

Explore UV-C products and resources

Technical literature

Manufacturer-hosted technical documents. Page links use PDF page numbers; some viewers open at the first page. Confirm the document revision and exact model before ordering.

DEX (DE[X]) is a double-ended UV-C fixture for installation within HVAC equipment. Its internal mounting arrangement is useful when a project calls for individual fixtures or fixture banks positioned near coils, drain pans or within an engineered airstream-treatment zone.

Tillman & Associates helps South Texas contractors, facility teams and engineers review new installations, retrofits and replacement parts. Ask Tillman about a DEX application.

What “double-ended” means

The DE[X] lamp has connections at both ends. This differs from a single-ended fixture whose lamp projects from an exterior-mounted housing. The datasheet describes stainless-steel construction, an aluminum reflector and fixture-to-fixture electrical connections. Individual, banked and parallel arrangements are listed.

Do not confuse a double-ended lamp with a dual-lamp fixture. DE[X] describes the lamp/fixture arrangement; DLN[X] is a separate two-lamp family. Use the complete model and lamp labels when comparing equipment.

Where DEX fits

Manufacturer application examples include positions downstream of cooling coils, above drain pans and in ducts or plenums. Actual suitability depends on the available space, mounting arrangement, treatment goal and conditions inside the equipment.

Internal mounting makes service access a central planning question. Consider how a technician will reach the fixture, disconnect it and remove the lamp without disturbing other components. For retrofits, photographs of the cabinet interior often reveal constraints that a coil-size measurement misses.

DEX versus an exterior-mounted single-lamp fixture

ArrangementDesign considerationInformation to provide
DE[X] internal fixturePositioning and servicing the assembly inside the equipment.Internal dimensions, access openings, proposed rows and mounting structure.
SL[X] / SLN[X] projecting lampMounting the housing outside the equipment and supporting the lamp inside.Wall location, exposure and lamp insertion/removal clearance.

These arrangements solve different installation problems. They should be compared using the actual layout rather than lamp wattage alone. Browse the UV-C product families.

Define the treatment objective before counting fixtures

Coil treatment targets stationary surfaces with extended exposure. Airstream treatment must deliver the required dose while air moves through the treatment zone. That shorter exposure changes the layout requirements.

Provide the required treatment objective along with airflow, temperature, humidity and duct or plenum dimensions. A general statement that UV-C is installed does not establish a specific airborne reduction rate. Likewise, energy or maintenance benefits depend on the equipment’s starting condition and how the system is applied; they are not a fixed savings guarantee.

Replacement lamps and older DE or DEF equipment

The manufacturer identifies DE[X] as previously known as DE and DEF. That naming history can help locate documentation, but it does not establish that every older lamp, ballast or accessory is interchangeable.

Send fixture and lamp labels, photographs of the end connections and the existing wiring arrangement. State whether you need a complete fixture, lamp or power-supply replacement. Review the lamp identification and specifications PDF, then contact Tillman to confirm the part.

What to send for a quote

  • Treatment objective and any specified performance criteria.
  • Coil-face and cabinet/duct dimensions, airflow and operating conditions.
  • Interior photographs, mounting positions, access openings and service clearance.
  • Supply voltage, intended fixture arrangement, controls and monitoring requirements.
  • Existing fixture and lamp identification for replacements; requested quantity.

Common DEX questions

Does double-ended mean there are two lamps?

No. It describes connections at both ends of the lamp. It should not be used as another name for the DLN[X] dual-lamp family.

Can I add fixtures until the available space is filled?

Fixture quantity should follow the treatment layout and electrical review. More equipment does not eliminate shadowing, access or material-exposure problems.

Can I replace an older DE fixture from its name alone?

No. Include the model and lamp labels, electrical information and photographs so the replacement can be checked.

Technical references and safe access

Use the installation manual for mounting, electrical connections and access protection. Prevent exposure to UV-C and disconnect power before service. Include interlocks and protection of exposed materials in the installation review.

Technical content reviewed November 12, 2026. Confirm the selected equipment and current documents before ordering.

Have drawings, an existing fixture or a replacement-part question? Contact Tillman for selection and quotation assistance.

Need this for a job?

Talk to a Tillman rep.

Contact us